Technical Characteristic
The system utilize equipment split processor which consist of horizontal type rotating reactor or cracking vessel, the catalyzed split craft and the product chemistry extract technology.
Environmental protection equipment is perfectly designed with waste gas burner and smoke dust removal chamber which protect and remove completely possible pollutions from emitted to air. Totally environmentally friendly system solution.
The system adopt simple chemistry method which had solved product colour and unusual smell.
The oil extraction rate of the pure waste plastic is never lower than 50%. The manufacture craft is advanced high automatically and complete with safety equipment.
After feeding the raw materials, the carbon black shall be release through auto-slag trap within approximately 30 minutes for 300 kg of carbon black.
Please download the brochures & presentation in Download Pages for more information
Safety and Security
The system has been designed with high safety. The phase of unliquifisable waste gas produced during the process are alkyl from C1 to C4, which are dangerous when burning directly. In our system, the process is made save where it is transferred first through the water close device and a safety device – burning air muzzle. Before burning, we should ensure of the production.
Environmentally Protective
Process in disposing waste gas, liquid and and residual.
1)Waste Gas
The waste gas is transferred through two safety device; water close & burning air nozzle. The nozzle will burn 100% fully, in which not only eliminate pollutants however also eliminate unwanted portion of fuel.
For smoke dust discharge we apply series ZTC Desulphurization and dust remover which could control the smoke dust discharge amount. This meet the relative standards of GB-2001.
2)Waste Liquid
The system produced waste acidic water in the process of oil disposing counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water is introduced to evaporator which use the heat of the flue of the main processor as its heating source. ( Approximately 50 kg of waste liquid from 1 tonne of oil , in which easily process for that small quantity)
3)Waste Solid
The solid residual shall be obtained after the catalyst splitting from the scrap plastic. The approximate composition of solid residual from the waste plastic is between 5% to 10%. The main component is the thick black carbon. The waste solid residual could be the raw material for the production industry of black carbon. In addition, it could be mixed with pulverized coal ash which produces for the raw material of thermal power plant as well as could be the raw material to manufacture pulverized coal ash brick i.e. one kind of the environmental protection building material.
